|
||
|
||
| MXL - Wide Display dash logger |
|
MXL is a powerful, professional and high-tech gauge which allows the user to sample and display a large number of parameters. MXL includes a tachometer, 1 RPM input, 8 to 12 analog inputs (temperatures, pressures, potentiometers, accelerometers, gyros, lambdas, “on-board” and custom sensors), 1 to 4 speed input, gear and lap time. With a beautiful and wide display, MXL has got a backlight and a high speed USB data download to a PC: these data may be analyzed with the powerful Race Studio 2 software. It can be a part of a network of AIM products such as (see through) GPS module, lambda controllers LCU-ONE or DaVid video system. It can be easily connected through CAN or RS232 to an existing ECU to enable a huge amount of extra channels. |
 |
||
Everything under control at a glance
|
MXL versions MXL is available in 3 versions: • STRADA (same as Pista, no sampling capability) • PISTA (1 speed, 8 analog inputs, AMP connectors) • PRO (4 speeds, 12 analog inputs) If you’re searching for a last-generation dashboard, designed for road use but able to store up to 250 laps, with 5 splits, maximum and minimum RPM, speed and two channel of your choice values, MXL STRADA is made for you. If you’re a driver, aiming to your best lap, you will find in the MXL PISTA a valuable help to analyze and optimize both your and your vehicle’s performances. Featuring 8 Megabytes of internal memory, 8 configurable channels, kit’s sensors and infrared transmitters and receivers, MXL PISTA is what you are searching for. If you’re looking for excellence, the most performing data acquisition system, MXL PRO has everything you need to bring you on the top of the podium. Featuring Deutsch Connectors, 16 Megabytes of internal memory, 4 speed channels, 12 configurable channels, kit’s sensors and infrared transmitters and receivers, MXL PRO is your ultimate choice. |
| Specifications Dimensions: 174 x 110 mm Display dimensions 140 x 67 mm External 9 –24 V power supply From 128 kb to 16 MB non-volatile internal memory Features • Water resistant, extra-wide display with backlight • Rugged and lightweight aluminium chassis • RPM graphical and numerical view • Configurable RPM scaling (from 4.000 to 20.000 end of scale) • Gear number: calculated or sampled from “on-board” sensor • CAN protocol for external “expansion modules” • 10 shift lights: Green - Yellow – Red • 6 freely configurable max/min alarm lights • Lap times – configurable Split times, through infrared RX TX • Internal data acquisition system with 8 MB non volatile memory • Up to 2 kHz sampling (200 Hz for single channel) • Total and partial (resettable) odometer • Can do track mapping using internal lateral g-sensor or our powerful GPS module |
|
Copyright © 2007, Aim SportSystems Australia
site by typhoon3
