MXL QM has been engineered to help you increase your dragster consistency and overall performance.


After the great success of MyChron3 660 gauges, AIM introduce this Quarter Mile gauge as the result of the refinement of one of the world's most successful data acquisition system, MXL.


High performance digital dash for your vehicle, plenty of channels and capable of the easiest connection to the most important ECUs on the marketplace, MXL QM is specifically designed for Drag Races, basing on eighth mile and quarter mile.
 

MXL QM stores runs starting with a manual switch - following NHRA rules - and can log RPM, up to 4 speed inputs, up to 12 analog channels and extended channels from an ECU interface (via CAN bus or RS232). All the setup is easily performed through the AIM DragOn software.


MXL QM can be interfaced (via proprietary CAN bus) with virtually infinite AIM LCU-One lambda controllers and with AIM DaVid Video Recording System.


All data are logged into the internal 8 MB flash memory and can be downloaded to the PC through USB connection or a powerful DataKey, both via the QMConnect software. AIM QMAn powerful software lets you create your personal ET database and analize performance data.
 

A whole racing week-end data can also be reviewed directly on the wide backlighted display, for immediate evaluation of the most important measures at the time slip times.



There is virtually no limit to the sensors that can be connected to MXL QM: engine rpm sensors, clutch rpm sensors, driveshaft rpm sensors, speed sensors, k-thermocouples, thermoresistors, pressure transducers for oil, water and brake, potentiometers, accelerometers, gyrometers.



 

Specifications
 
 

• Dimensions: 174 x 110 mm Display: 140 x 67 mm
• Water resistant, extra-wide display with backlight
• Rugged and lightweight aluminium chassis
• External 9 – 24 V power supply

Features
 
 

• RPM graphical and numerical view: configurable RPM scaling (from 4.000 to 20.000 end of scale)
• Gear number: calculated or sampled from “on-board” sensor
• 10 shift lights: Green - Yellow – Red
• 6 freely configurable max/min alarm lights
• Internal data acquisition system with 8 MB non volatile memory
• Up to 2 kHz sampling (200 Hz for single channel)
• Up to 4 speed inputs, up to 12 analog channels and extended channels from an ECU interface (via CAN bus or RS232)
• Proprietary AIM CAN bus interface with virtually infinite LCU-ONE lambda controllers and/or DaVid Video Recording System.
• Shift Lights, a powerful and configurable way to advise your movements.
• DragOn software to easily set up the gauge
• QMConnect software to download via USB or DataKey
• QMAn software to create and analize your personal ET database